
SC10-6 pumps
Product Description
SC10-6 pumps
The SC10-6 pumps are the highest-capacity version within GLOBE's SC pumps. These air-driven liquid pumps generate high pressure from a standard compressed air supply. The series has a 7" diameter air piston and a 2 1/2" stroke.
Thirteen models are available, from ratio 5:1 to 740:1. This lets you match the pump to the pressure and flow rate your test setup requires.
SC10-6 pump specifications
- Number of models: 13
- Ratio: 5:1 to 740:1
- Maximum working pressure: 35 to 4,480 bar (464 to 65,000 psi)
- Volume per stroke: 290 to 2 cc
- Flow rate: 65 to 0.48 l/min
- Maximum air consumption: 112 SCFM
Air consumption and behaviour under load
Air consumption figures are measured at a drive air pressure of 100 psi and free flow (zero outlet pressure). Under these conditions the pump runs at maximum speed.
As outlet pressure rises, pump speed, air consumption and liquid flow decrease. Once the pump reaches the outlet pressure determined by its pressure ratio, it stalls and stops. This allows the pump to hold a set pressure without a separate shut-off valve.
Mounting
The 10-6 series can be mounted in any position, preferably vertically. If you mount the pump upside down, fit a drain cock to drain liquid that collects in the air chamber of the control valve.
Dry Lube version (D6)
The 10-6 series is also available as a D6 version. These pumps are identical to the 10-6 series, but are pre-lubricated and do not require an air line lubricator. You can recognise them by the D6 prefix in the part number.












