
SC pumps
The SC pumps
The SC pumps are air-driven liquid pumps that generate high pressure from a standard compressed air supply. The range covers three piston sizes, so you can match the pump to the pressure and flow rate your test setup requires. In total there are 38 models, with pressures up to 65,000 psig.
The 10-4 series
This is the compact option, with a 4" diameter air piston and a 1 1/4" stroke. Nine models are available with pressures up to 29,500 psig. Maximum air consumption is 28 SCFM.
10-5 & D5 series
This is the mid-range option, with a 5 1/2" diameter air piston and a 1 1/4" stroke. Sixteen models are available with pressures up to 55,000 psig. Maximum air consumption is 56 SCFM.
10-6 & D6 series
This is the highest-capacity option, with a 7" diameter air piston and a 2 1/2" stroke. Thirteen models are available with pressures up to 65,000 psig. Maximum air consumption is 112 SCFM.
Air consumption
Air consumption figures are measured at a drive air pressure of 100 psi and free flow (zero outlet pressure). Under these conditions the pump runs at maximum speed.
Pump behaviour under load
As outlet pressure rises, pump speed, air consumption and liquid flow decrease. Once the pump reaches the outlet pressure determined by its pressure ratio, it stalls and stops. Speed, air consumption and flow then drop to zero. This allows the pump to hold a set pressure without a separate shut-off valve.
Mounting
The 10-5 and 10-6 series (and the D5 and D6 versions) can be mounted in any position, preferably vertically. If you mount the pump upside down, fit a drain cock to drain liquid that collects in the air chamber of the control valve.
Dry Lube models (D5 and D6)
The D5 and D6 pumps are identical to the 10-5 and 10-6 series, but are pre-lubricated and do not require an air line lubricator. You can recognise them by the part number: they carry the prefix D5 or D6, and the model suffix indicates the actual pressure ratio instead of a numeric code.












